Steel Sales Phoenix | Steel Distributor

Processing

Processing

Reliance Metalcenter offers a wide variety of unique processing capabilities. We offer high definition steel cutting with our HyperTherm plasma featuring “True Hole Technology”. Our expert saw operators can deliver even the most extreme tight tolerance miter cuts. Our two high production shears mean short lead times and top quality parts. Let our leveling lines cut your high volume steel blanks to length to eliminate unnecessary waste and drive down costs. Our experience and network of partners/processors will turn your project into a reality. Put our reputation for quality and precision to work for you today.

Laser

-Trumpf 5040

  • 8000 watt Trumpf Laser with stacker and conveyor to optimize run times with lights out feature on large runs.
  • Very comfortable through 3/8” thick, anything beyond please contact your sales rep
  • 78” x 157” Working Range on table

Plasma Tables

-Kinetic K5000

  • 120”x 600” table size. Burn up to 8” thick plate, drill through 6” thick plate
  • Drill line and ability to bevel, bore, tap, etch, and countersink.
  • Dual 400 Amp Hypertherm High Def Plasma
  • Dual Harris Oxygen Natural gas torches
  • 40hp CAT50 Spindle
  • 25 Station Automatic Tool changer

-MG Titan

  • 156” x 480” table and can burn up to 12” thick
  • 2 High-definition Hypertherm plasma heads
  • 4 Turbo Flame Oxy Torches

Shearing

-¼” Cincinnati

  • Up to 144” Wide and a 48” Back Stop
  • Up to ¼” thick material
  • Tolerance up to +/-.0625”

-Accu Shear

  • Table width of 120” and 36” back stop
  • Up to 3/8” thick material
  • Tolerance up to +/-.0625”

Saws-2 of Each

-Hyd Mech Saw

  • Max cut height up to 24”
  • Max cut width up to 24”
  • Miter cut from 30-120 degrees- One saw blade swings horizontally like a gate, other swings vertically like a pendulum allowing for multiple options to saw cut at optimum efficiency
  • Tolerance up to +/-.0625”

-Hem Saw

  • Max cut height 21.75”
  • Max cut width 30”
  • Tolerance up to +/-.0625”

Level Lines

-Herr Voss-Heavy Gauge

  • Coils up to 40000 pounds
  • Coil ID 20”-30”
  • Coil Width 24”-72” Wide
  • Lengths from 24” to 480”
  • Max thickness ¼”
  • Tolerance +/-.125”

-Red Bud-Light Gauge

  • Coils up to 40000 pounds
  • Coil ID 18”-24”
  • Coil Width 24”-60” Wide
  • Lengths from 20” to 240”
  • Gauge range from 30 gauge to 10 gauge
  • Tolerance +/-.125”

Ironworker

-GEKA Hydrocrop 110 SD

Shears for profiles on round and square bar, angles, with large selection of taps and punches to meet customers’ needs.

Angle Line

-Anglemaster 663

  • Uses NC1 Files only
  • No stainless steel
  • Min Starting Length-80”
  • Flat bar Scrap-21”
  • Angle Scrap-12”
  • Min Angle Size 1 ½” x 1 ½” x 3/16”
  • Max Angle Size 8” x 8” x 1”
  • Min Flat Bar Narrowest ¼” x 2”
  • Max Flat Bar Thinnest 3/16” x 3”
  • Max Flat Bar 1” x 12”
  • Min Channel Size 6” x 8.2
  • Max Channel Size 12” x 25
  • Channel cannot be cut, only punched.
  • Kerf- +/-1/16”
  • No Chamfer Ability
  • Can scribe to depth of 1/16”-1/8”
  • Cannot punch any material smaller than thickness of material-same rule as burning.

Please contact your sales rep with any and all additional questions.

We are happy to look at whatever project, drawing, or inquiry you bring us.

FREE QUOTE




Gratis nedlasting pdf brukerveiledning for weslo wlex23180 hjemmetreningsstudio anavar faste eller roterende ermet manualer runde masser.